sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
Tags: Pipe Fittings Production Machinery, Pipe Fittings Auto-production Solution, PVC Pipe Fittings Auto-production System, LESSO Group, SWITEK Automation
SWITEK new 2 cavities PVC pipe fittings runner cutting system started up successfully in the world largest pipe fittings manufacturer LESSO Group.
SWITEK 2 Cavities PVC Pipe Fittings Runner Cutting Solution is one of the pipe fittings injection automation solutions custom made for LESSO Group to automize the injection production of PVC pipe fittings. The system has SWITEK 3 axis servo injection robot SW6715DS which is an injection robot with a payload up to 15kg for injection molding machine from 500~1000T. The PVC pipe fittings runner cutting solution is a price smart solution for PVC pipe fittings runner cutting.
LESSO group prodice a various of PVC pipe fittings in Haitian injection molding machine from 750~1200T, SWITEK Custom make the runner cutting system to match the injection molding machine and the mold to help LESSO group reduce the man hour and increase the productivity.
BL300EKH/C1600 -- BOLE High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 819 g |
| 3 | Shot Speed | 112 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 590 mm |
| 6 | Space Between Tie Bars | 655 x 605 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 660 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 19.55 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
