sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
FCS High Speed Hydraulic Injection Molding Machine SA-290H 2 Cavities Thin-wall Food Container Production
Tags: FCS Injection molding machine, high speed injection molding machine, high speed injection robot, thin-wall container injection system
SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.
For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.
SW-M280-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2800 kN |
| 2 | Shot Weight | 649 g |
| 3 | Shot Speed | 307 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 625 x 575 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 17.2 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
