sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Roboplas onshow IML Solutions of 4 cavities box 5 faces IML labeling with visual control and boxing
Tags: Roboplas IML Solutions, SWITEK IML Solution, Amul Butter Box Production System, SWITEK IML Robot, Economic IML Solutions
Roboplas onshow IML Solutions of 4 cavities box 5 faces IML labeling with visual control and boxing.
5 Face IML labeling is a popular decorating of the butter box which is efficient in producing. The IML System Roboplas onshow is a turn-key IML solution which integrated the visual control and boxing of a 5 face IML labeling of the butter box for the highest productivity and free from biomatic pollution during production.
The counter part of this system is the side entry IML System designed by SWITEK Automation for the production of AMUL butter box in India. As the leading dairy products producer in India, there're more than 5 IML robots by SWITEK among the package supplier of Amul in production of the containers for Amul butter with a simplified system of which provide only IML labeling. Of course without visual control and boxing the cost of the SWITEK IML System would be much lower compared to the Roboplas solution. Which will make the starting of the IML project much easier for small and medium sized package producers.
SW-M250-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 234 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 500 mm |
| 6 | Space Between Tie Bars | 575 x 525 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 28 kW |
| 10 | Heating Capacity | 15.3 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
