sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
PowerJet Machinery Finished the Installation of Their New Two Platen Injection Molding Machine
Tags: PowerJet machinery, Two platen injection molding machine, SWITEK rotot, DP1000-S6
The installation of Powerjet two platen injection molding machines in the factory of PowerJet customer ended up with a smooth production.
Without toggle, the two platne injection molding machine is shorter in their body to help the parts producer to optimize the use of their floor space. In this project the main machine is DP1000-S6 which is a two platen injection molding machine with a clamping force up to 1000T. It's an ideal choice for the production of large size household parts and Car Aprts. The best injection robot for this machine woud be SWITEK 3 Axis servo injection robot SW7518DS.
JM208-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2080 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 216 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 510 mm |
| 6 | Space Between Tie Bars | 530 x 530 mm |
| 7 | Mold Thickness (Min) | 180 mm |
| 8 | Mold Thickness (Max) | 550 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
