sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
NPE 2024 -- Spero On Show EOAT Quick Change Technology By Their Heavy Duty Injection Robot with Servo A/C Axis
Tags: NPE 2024, SEPRO Injection Robot, SWITEK Robot, EOAT Quick Change Technology , Heavy Duty Injection Robot
NPE 2024, SEPRO on show the EOAT fast change application of their heavy duty injection robot with servo axis A/C to provide the clients a more dynamic automation application of injection robot in their large size plastic parts injecdtion production.
Fast change is a device which will mostly installed to the head of a 6 axis servo industrial robot in a project which will request the robot to pick different parts with a variety of EOATs to finish the production process like assembly. With a servo A/C axis will enable the robot to turn the parts at any direction to meet the special picking and placing demand of the injection production process. It's very important in the production of complex plastic parts such as car bumper.
As the counter part of SEPRO robot, SWITEK SW77 series heavy duty injection robot can be equipped with servo A/C axis to provide a payload up to 50kg for the injection automation application of car parts production, plastic pallet picking etc. Will provide clients around the world a price smart solutions of large size and complex plastic parts picking.
BL250EKH/C980 -- BOLE High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 702 g |
| 3 | Shot Speed | 126 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 530 mm |
| 6 | Space Between Tie Bars | 555 x 505 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 570 mm |
| 9 | Pumper Motor | 28 kW |
| 10 | Heating Capacity | 14.52 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
