sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
NPE 2024 -- ARBURG Showcased BRINK 4 Cavities Cups IML Solutions with Vision Control
Tags: NPE 2024, ARBURG Allrounder All Electric Injection Molding Machine, BRINK IML Solution, IML Robot
In the just finished NPE 2024, ARBURG show cased the 4 cavities cups IML solutions with visual control of BRINK by ARBURG Allrounder All electric injection molding machine.
As the top IML solutions provider in the world, BRINK IML system has many innovative highlights although it's only a system of 4 cavities of cups. The highlights include:
The BRINK IML System have the vision control system integrated into an impact designed IML robot to insure the efficiency of the system and reduce the installation floor space.
According to BRINK official introduction, the magazine and EOAT of the IML system is interchangable for different parts with a standard interface, which will make it easy to switch to the production of the other parts. It's a competitive feature in a fast changing market.
The other highlights of the BRINK IML system is the swapable magazine. With this design, the system will ensure a non-stop production and guarantee the productivity of the IML system.
With the ARBURG Allrounder all electric injection molding machine, the BRINK 4 cavities cups IML Solution is not doubt one of the top IML solutions for Yogurt cups IML production in NPE 2024.
U265TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2650 kN |
| 2 | Shot Weight | 710 g |
| 3 | Shot Speed | 190 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 585 x 565 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
