sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Robin Dean, the CEO of Trade Group, Shared Her Opinions About NPE 2024
Tags: NPE2024, What Will NPE Bring to Exhibitor, What will NPE Bring to Visitors
NPE 2024, the largest exhibition of plastic and plastic machinery, is onpening on May 5th, 2024, what does NPE means to a plastic industry insider? And what does NPE means to ordinary people? With all these question Cameron Wilkinson intervieded Robin Dean, the CEO of Trade Group and who had been design the booth for NPE attenders for more than 20 years, shared her opinions about NPE and what an exibitor can do to attract the exhibitors.
As the largest exhibiition of plastic industry in North America, the NPE 2024 attracted exhibitors from 110+ countries to show their cutting edge technology of injection automation, and will attract 10's of thousands of visitors daily globally to meet the talents of injection technoogy. It's more than a show of plastic industry but a show for all industry because all industries will use plastic nowadays.
To an exhibitor, it's difficult to attract the attention of all visitors but a good management of the booth and innovative design of the booth would be for sure be great help. As a potential visitor, it's no doubt that I would like to see more cutting edge injection automation solution in the exhibition but if there's greate design of the booth, it would be attractive, isn't it?
U218TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2180 kN |
| 2 | Shot Weight | 419 g |
| 3 | Shot Speed | 180 mm/s |
| 4 | Screw Diameter | 50 mm |
| 5 | Opening Stroke | 500 mm |
| 6 | Space Between Tie Bars | 510 x 510 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 530 mm |
| 9 | Pumper Motor | 19 kW |
| 10 | Heating Capacity | 16.3 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
