sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Muller Turn-key Two Compartment IML Yogurt Container 6 Cavities Side Entry IML Solution
Tags: Muller IML Solutions, IML Yogurt Cups, Two Compartment IML Cups Production Solution, SWITEK IML Solutions
Muller put on market turn-key two compartment IML Yogurt container-6 cavities side Entry IML Solutions for dairy products producers.
The two compartment IML Yogurt container is a popular package solution among the European dairy paroducts producers. It's an innovative package scheme for Yogurt with one compartmnet for the containing of original flavour yogurt and the other compartment with different fruit sauce or nuts etc for the consmers to have them mixed up when enjoy them. It'll help to increase the flavour of the yogurt while not influce the quality guarantee period of the yogurt.
Instead of two compartment IML Yogurt containers, the Chinese Yogurt producers choose another solution which will have a high caps on the top of the IML Yogurt cups with a bag of well sealed nuts to be enjoyed with the yogurt to get the instant energy supplement. This product get overwhelmed populatity among the office ladies in China as a healthy supplement of energe. Compared to the the two compartment design, this package solution will have more advange in the production cost of the package. The cost of the mold and IML robot would be much lower than the two compartment package. It's no doubt an economic option of the two compartment IML Yogurt cups for small and medium sized Yogurt producers.
SW-M280-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2800 kN |
| 2 | Shot Weight | 649 g |
| 3 | Shot Speed | 307 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 625 x 575 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 17.2 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
