sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
MULLER Provide Turn-key IML Solutions of 8 Cavities Cups Side Entry IML Solutions with Vision Control
Tags: Muller IML Solutions, IML Yogurt Cups, Two Compartment IML Cups Production Solution, SWITEK IML Solutions
Muller automation providing turn-key IML Solutions of 8 cavities IML Yogurt cups with ear precise IML labeling solution with vision control and stacking solution ready for auto-packing.
Instead of traditional 4+4 horizontal layout, the new system adopt a vertical layout of the mold to ensure a precise labeling of the ear cups, and to ensure a perfect labeling of the cup ears a vision control system of two camera was introduced to the system to ensure that each of the ears of the cups ready for packing are well labeled to provide 100% qualified IML cups to the dairy producers.
For the IML production of the standard round cups for Yogurt most of the mold layout design would be horizontal, which will help to reduce the hight of the magazine of the IML robot and reduce the size of the total IML system. And instead of the only have thee cups well stacked to be manually carton loaded, an automatic packing system will help to increase the productivity of the system and help to produce the risky of potential biotic introduced during the packing of the IML cups.
HXF290 -- Haixing High Precision Energy Saving Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2900 kN |
| 2 | Shot Weight | 845 g |
| 3 | Shot Speed | 117 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 600 mm |
| 6 | Space Between Tie Bars | 640 x 640 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 650 mm |
| 9 | Pumper Motor | 36 kW |
| 10 | Heating Capacity | 24.2 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
