sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Fakuma 2023 -- LK IMM On Show Serov & All Electric Injection Molding Machine
Tags: FAKUMA 2023, LK IMM, LK All Electric Injection Molding Machine, SWITEK Injection Robot
FAKUMA 2023, Luigi Tondi, the sales and business development director of LK IMM EUROPEAN, introduced the advantages of the injection molding machine on show booth 1213/B1.
The injection molding machine which LK IMM developed for the European market include the Potenza series injection molding machine which has a clamping force from 80T to 1000T which on show Fakuma 2023 is PT130; The other injection molding machine is the "ELETTRICA" series of full electric injection modling machine with clamping force from 100T to 350T, and of which model on show is EL130. According to Mr. Luigi, the "ELETTRICA" series of full electric injection molding machine can be added some oil pump to make it a "Hybrid" injection molding machine for some special application.
Since both "POTENZA" & "ELETTRICA" series of injection molding machine are small and medium sized injection molding machine, the best injection robot for them would be the SW6 series injection robot by SWITEK Automation, with a payload range from 3kg ~ 15kg, and both 3/5 axis servo configuration for injection molding machine from 80T ~ 1000T.
JM208-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2080 kN |
| 2 | Shot Weight | 393 g |
| 3 | Shot Speed | 169 mm/s |
| 4 | Screw Diameter | 46 mm |
| 5 | Opening Stroke | 510 mm |
| 6 | Space Between Tie Bars | 530 x 530 mm |
| 7 | Mold Thickness (Min) | 180 mm |
| 8 | Mold Thickness (Max) | 550 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.
Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:
For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.
