sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
A New Forza Series Two Platen Injection Molding Machine by Ningbo LK Technology Co., Ltd. Was Installed for the Production of Plastic Chairs.
Tags: Ningbo LK Technology Co., Ltd. , Forza Two Platen Injecdtion Molding Machine, LK FA1400, Injection Robot, SWITEK Robot SW7518DS
The new FORZA series two platen injection molding machine FA1400 by Ningbo LK Technology Co., Ltd. was installed for the production of plastic chairs with robot picking.
For furniture production it's demanding on the surface of the parts with novelty design. With precise injection the new FORZA series two platen injecdtion molding machine FA1400 can produce the perfac injection surface to meet the stringent requirements in furniture production. With a heavy duty injection robot to provide a turn-key plastic chairs production to customer.
For an injection molding machine of 1400T clamping force, an injection robot with a payload of 15kg would be sufficient for the parts picking. The robot for this application would be SWITEK 3 axis servo injection robot SW7518DS which has a payload of 15kg and is suitable for injection molding machine 650~1800T.
HXF320 -- Haixing High Precision Energy Saving Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3200 kN |
| 2 | Shot Weight | 900 g |
| 3 | Shot Speed | 97 mm/s |
| 4 | Screw Diameter | 70 mm |
| 5 | Opening Stroke | 640 mm |
| 6 | Space Between Tie Bars | 685 x 685 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 690 mm |
| 9 | Pumper Motor | 45 kW |
| 10 | Heating Capacity | 24.2 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
