sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Ningbo LK Technology Co., ltd. Inhouse Testing Their New Forza Two-platen Injection Molding Machine with IML Solutions
Tags: Ningbo LK Technology Co., Ltd., FORZA Two Platen Injection Molding Machine, Yangsen IML Solutions, SWITEK IML Solutions, SWITEK Robot.
Ningbo LK Technology Co., Ltd. in house testing of their new Forza two-platen injection molding machine in production of 20L bucket with Yangsen side entry IML Robot.
With more flexibility in the mold opening stroke, two platen injection molding machine is an ideal choice for deep cavity parts IML production. In this case LK chose a double-size in mold labeling solution which the IML robot will insert the label and pick the bucket simultaniously but will request a much larger injection molding machine. An economic subsitution would be a two-step IML solution wich will do the parts picking and label inserting in two seperate steps with a much smaller opening stroke requiremnt.
For non-IML production, the injection robot for LK FORZA two platen injection molding machine would be SWITEK SW7 Series injection robot. which has a paylaod ranging from 5~75kg for injection molding machine 450T ~ 4000T. Would be the best robot for FORZA two platen injection molding machine.
JM258-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2580 kN |
| 2 | Shot Weight | 393 g |
| 3 | Shot Speed | 169 mm/s |
| 4 | Screw Diameter | 46 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 580 x 580 mm |
| 7 | Mold Thickness (Min) | 190 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
