sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
K Fair 2022, KraussMaffei On Show Turn-key Solution for Logistic Plastic Cages
Tags: K Fair 2022, KraussMaffei Injection Molding Machine, Robot for KraussMaffei Injection Molding Machine, Injection Molding Solutions for Plastic Cages
K Fair 2022, KraussMaffie on show turn-key solutions of plastic cages for modern logistic by their precisionMolding 160-750 injection molding machine.
As one of the world's leading manufacturers of injection molding machines founded in 1838, KraussMaffei injection molding machine represented the top technology in plastic molding. The solution on show K Fair 2022 is a full automation system for the production of logistic cages which include the injection molding machien (PrecisionMolding 160-750), a gantry picking robot and a scara robot to finish the folding of the cages produced. With this system it's possible to produce a logistic plastic cage automatically.
To reduce ths system cost, an optional solution would be to have the picking gantry robot replaced by SWITEK 3 axis servo injection robot SW7518DS which is a robot with a payload up to 15kg and suitable for injection molding machine from 550T ~ 1000T. It's also possible to be upgraded to an 5 axis sero injection robot with the pneumatic posture replaced by an A/C servo posture for complex application. Anyway, SW7518DS is an injection robot of reliable with flexibility for your injection automation application.
U300TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 1071 g |
| 3 | Shot Speed | 189 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 590 mm |
| 6 | Space Between Tie Bars | 610 x 585 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 640 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
