sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
LK On Show FORZA Two Platens Injection Molding Machine at K-Fair 2016 With Pails Side Entry IML Solution
Tags: LK FORZA Injection Molding Machine, Two-platen Injection Molding Machine, K-Fair, K-show, IML Solutions
K-Fair 2016, LK Machinery on show two-platen injection molding machine Forza PT450H with side entry IML Solutions of single cavity pails.
As a deep cavity product, it'll request a larger opening stroke of the injection molding machine. To have the larage bucket produced by a two-platen injection molding machine will occupy less floor space. As an injection molding machine manufacuturing company founded in 1979, LK FORZA series two-platen injection molding machine is one of the top two-platen injection molding machines available in the market.
For large size pails like 20L/33L, the more economic solution would be a Top Entry IML Solution, compared to the side entry one, a top entry IML system will have a lower purchasing cost and because the robot is to be installed to the top of the injection molding machine, it'll occupy less floor space compared to the side entry IML Solution. With the first IML robot on show Chinaplas 2009, SWITEK is now providing both top & side entry IML solutions for large size containers to clients around the world.
HXF230 -- Haixing High Precision Energy Saving Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2300 kN |
| 2 | Shot Weight | 447 g |
| 3 | Shot Speed | 116 mm/s |
| 4 | Screw Diameter | 50 mm |
| 5 | Opening Stroke | 490 mm |
| 6 | Space Between Tie Bars | 536 x 536 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 560 mm |
| 9 | Pumper Motor | 24 kW |
| 10 | Heating Capacity | 17.6 kW |
For PVC/PPR pipe fittings with nuts with a diameter of around φ25mm most of the producer will choose an injection molding machine of around 250T and a mold cavities of 8 Cavities, will a more cavities mold design with a larger injection molding machine a better choice for pipe fittings producers?
According to the experience of working with LESSO group in the automiztion of their PVC/PPR pipe fittings injection production system, we finally decide to have an 8 cavities mold deisgn with 250T injection molding machine because:
Anyway, to upgrade your PVC/PPR pipe fittings injection molding system you must keep in mind that it's only valuable to have an automation system for bulk production products, which means that one injection molding machine with only one mold to be equipped with one automation system for the pipe fittings' Nut insertion, runner cutting and parts picking.
For any other question about a PVC/PPR pipe fittings auto-production system please contact Adams from SWITEK for a turn-key solutions of pipe fittings production.
