sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
HaitTian Demonstrate New Two Platen Injection Molding Machine JU5500V/3450 with the Micro-Opening Physical Foaming Solution
Tags: Haitian Injection Molding Machine, JU5500V/3450, Two Platen Injection Molding Machine, SWITEK Injection Robot
Haitian machinery demonstrate the features of their 5th generation of JUPITER series of two platen injection molding machine by their JU5500V/3450 with the mico-opening physical foaming solution for automotive chassis.
The new JU550V/3450 in demo is equipped with a micor-foaming unit and micro-mold opening technology, which is able to offer up to 40% energy saving through electrical charging. It's a smart injection molding machine optimized for the production of the automotive with micro-foaming (MuCell) injection technology.
In general an injection robot would be installed to do the picking and place the parts on the conveyor, the robot to be recommended for JU5500V/3450 here is SW6715DS produced by GuangDong Switek Technology Co., Ltd. As a 3 axis servo injection robot with a payload up to 15kg designed for the injection molding machine 500~800T, it's suitable for the injection automation application of parts picking, in mold insertion and as the core robot for any other injection automation solutions.
For more injection automation solutions with a JU5500V/3450 please contact Adams from SWITEK, for a turn-key solution of injection automation.
SW-M280-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2800 kN |
| 2 | Shot Weight | 772 g |
| 3 | Shot Speed | 262 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 625 x 575 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 17.2 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
