sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
ChenHsong on Show Crystal Plate Injection Production Solution at ArabPlast 2025 by JM168
Tags: ChenHsong Injection Molding Machine, JM168, MK6 Pro, Robot for JM168, SWITEK Robot
In the just ended ArabPlast 2025 which held in Dubai from Jan. 7~9th, ChenHsong machinery on show their new MK6 Pro series injection molding machine JM168 in production of crystal plate made from PS material at the cycle time of 12s.
As one of the best buy servo injection molding machine produced by ChenHsong machinery, JM168 is one of the best choice for the production of small and medium sized household products. In the exhibition ChenHsong choose to have the crystal plate free dropped from the mold, but to protect the plate from scratched during the free dropping, the better solutions is to have a robot to pick it from the injection molding machine and place it on a conveyor.
SW6308S-20 is a 3 axis servo injection molding robot designed for the injection molding machine with a clamping force from 80~250T. The payload of this robot is 3kg and is an economic solutions for the picking and placing of the parts. And the SW6 series injection robot has both single arms 3 axis servo configuration and double arms 5 axis servo robot configuration which can cover the injection molding machine with clamping force from 80~850T.
For more information about injection robot selection please contact Adams from SWITEK, your personal consultant of injection automation system integration.
Servo Hydraulic Injection Molding Machine 320 SEIII B -- Welltec Machinery Ltd.
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3200 kN |
| 2 | Shot Weight | 981 g |
| 3 | Shot Speed | 224 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 700 mm |
| 6 | Space Between Tie Bars | 680 x 680 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 700 mm |
| 9 | Pumper Motor | 220 kW |
| 10 | Heating Capacity | 22.15 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
