sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
JetEngine New IML Robot for 2 Cavities 2 Compartment Cups In Production
Tags: JetEngine Automation, IML Robot, JetEngine IML Solutions, SWITEK IML Robot, IML Solutions for 2 Compartment Cups
JetEngine new IML robot for 2 compartment container IML production of 2 cavities mould started up successfuly in production.
The two compartments cup is one of the most popular container for Yogurt among the European dairy producers which is a samart solution to serve some other ingredients together with the Yogort of the original taste like a combo of nuts. The combination of Yogurt + nuts will provide the consumer a low fat suppliment of engergy immediatly. It's warmly welcomed by the office ladies.
Althoug it's a smart container for Yogurt, but it's not so smart to produce. With 3 labels to one cup from different side, it's a challenge to any IML solution providers. With modular design, the SW8 Series of IML robot by SWITEK is an ideal choice for the production of 2 compartmnets IML Cups.
SW-M280-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2800 kN |
| 2 | Shot Weight | 906 g |
| 3 | Shot Speed | 307 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 625 x 575 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 17.2 kW |
PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.
Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:
For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.
