sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
JetEngine Showcase New IML Solutions of 2/4 Cavities Cups Side Entry IML Production
Tags: JetEngine Automation, JetEngine IML Robot, IML Solutions, SWITEK IML Robot, IML Solutions for Cups
JetENgine showcase their new solutions of 2/4 cavities large size cups side entry IML production without vision control in Youtube.
The IML solution showcased is for the IML production of beverage cusp with a diameret 114 * 166 and two cavities cups with diameters of 193mm * 186mm which seems for the POP corn. Both cups have huge market potential and easy for a new comers to start their new IML container production business.
Backed by a huge market of "New Tea Beverage" market in mainland China, the IML solutions for the production of 750ml had been increased to 6/8 cavities at a cycle time around 8s. The main chain store of the "New Tea Beveragers" had been switching their cups from the traditional offprint technology to IML with the new SW8 Series IML Robot by SWITEK Automation.
MARS 3000/1800G -- HaiTian Mars.G Series Servo Injection Moulding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 903 g |
| 3 | Shot Speed | 279 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 600 mm |
| 6 | Space Between Tie Bars | 660 x 660 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 660 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 24.05 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
