sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Hwamda new turn-key snack box production system with packing started up with two high speed injection molding machine and Shini Robot
Tags: Hwamda Machinery, Snack Box Production System, High Speed Hydraulic Injection Molding Machine, Shini Robot, Snackbox Packing System
New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.
This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.
To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.
MARS 3000/1800G -- HaiTian Mars.G Series Servo Injection Moulding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 769 g |
| 3 | Shot Speed | 238 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 600 mm |
| 6 | Space Between Tie Bars | 660 x 660 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 660 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 24.05 kW |
For PVC/PPR pipe fittings with nuts with a diameter of around φ25mm most of the producer will choose an injection molding machine of around 250T and a mold cavities of 8 Cavities, will a more cavities mold design with a larger injection molding machine a better choice for pipe fittings producers?
According to the experience of working with LESSO group in the automiztion of their PVC/PPR pipe fittings injection production system, we finally decide to have an 8 cavities mold deisgn with 250T injection molding machine because:
Anyway, to upgrade your PVC/PPR pipe fittings injection molding system you must keep in mind that it's only valuable to have an automation system for bulk production products, which means that one injection molding machine with only one mold to be equipped with one automation system for the pipe fittings' Nut insertion, runner cutting and parts picking.
For any other question about a PVC/PPR pipe fittings auto-production system please contact Adams from SWITEK for a turn-key solutions of pipe fittings production.
