sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
A New 30 Cavities Work Drown Project Started with Hwamda High Speed Hydraulic Injection Molding Machine HMD 228M9 With Robot Picking
Tags: Hwamda Machinery, High Speed Injection Molding Machine, HMD 228M9, SWITEK Injection Robot, Injection Molding Machine for Work Drown
A new 30 cavities work drown project started with Hwamda high speed injection molding machine 228M9 with robot picking and placing.
This is a new application of Hwamda high speed hydraulic injection molding machine in the poroduction of medical parts with a robot picking. As a deep cavity parts, work drum request the injection molding machine to have a hgiher injection precision and clean and stability. To meet all these demand, the robot for the parts picking can be SWITEK 3 axis servo injection robot SW6710DS, which is stable and reliable for parts picking in a clean room.
JM328-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3280 kN |
| 2 | Shot Weight | 1075 g |
| 3 | Shot Speed | 376 mm/s |
| 4 | Screw Diameter | 67 mm |
| 5 | Opening Stroke | 660 mm |
| 6 | Space Between Tie Bars | 680 x 680 mm |
| 7 | Mold Thickness (Min) | 225 mm |
| 8 | Mold Thickness (Max) | 680 mm |
| 9 | Pumper Motor | 48 kW |
| 10 | Heating Capacity | 26 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
