sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Hwamda Machinery New High Speed Injection Robot HMD 320M8 Started Up in a Pail Production Project
Tags: Hwamda Machinery, High Speed Injection Robot, HMD 320M8, SWITEK Robot, SWITEK IML Solutions
Hwamda Machinery new high speed injection molding machine HMD 320M8 started up in a 2 gallon pail production project with a welllih servo injection robot to pick out the pail and put on the conveyor.
As the top high speed hydraulic injection molding machine manufactuer in China, HMD 320M8 is a popular high speed injection modling machine among the thin-wall container manufacturers. In this project the Hwamda machine was installed with a Welllih robot to do the picking to provide a turn-key Injection Automation Solutions to the customer.
As an excellent hydraulic injection molding machine, a better application of HMD 320M8 is to have it work in a fast production of thin-wall containers or lids with a SWITEK high speed 3 axis servo injection robot SW7112DS, which is a robot with a payload of 2kg and a drycle time lower to 3.3s; Or in a high speed IML Soutions with SWITEK high speed side entry IML robot SW833-19, which had been well proofed one of the most efficient IML Robot made in China.
U238TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2380 kN |
| 2 | Shot Weight | 642 g |
| 3 | Shot Speed | 160 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 520 mm |
| 6 | Space Between Tie Bars | 530 x 530 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
