sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Ambiente Plastico Interviewed Haitian Group at Plastimagen 2023 in Mexico
Tags: haitian injection molding machine, zhafir injection molding machine, ambiente plastico, all electric injection molding machine, plastimagen 2023
At the 24th Plastimagen in Mexico, Haitian group on showed their MA1600III energy saving injection molding machine with their servo injection robot Hilectro in a 8 cavities closure injection production demonstraction.
"The new servo system will help to increase the precision and efficiency of the injection molding machine.", the sales of Haitian group tell Ambiente Plastico, "A turn-key solution will help the buyer reduce the cost of purchas and reduce the risk of potential system failure and avoid the dispute when the failure occurs.".
U300TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 913 g |
| 3 | Shot Speed | 189 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 590 mm |
| 6 | Space Between Tie Bars | 610 x 585 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 640 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
