sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
The Chairman of YuFa Group Mr. Cai Shared His Opinion of a Custom Made Injection Molding Machine in the Production of Home Living Products
Tags: Haitian Injection Molding Machine, Robot for Injection Molding Machine, YuFa Group, Custom Made Injection Molding Machine, MA Series Servo Injection Molding Machine
On June 24, 2024, HaiTian group unloaded their interview of Mr. Cai WenZhi, the chairman of YuFa Group, which is a home living products producer in in China, about their cooperation with Haitian Group and the advantages of a custom made injection molding machine in the production of the home living products injection production.
YuFa group was established in year 2000 and has now 5 production base in production of home living products. Among which 80%~90% of them are plastic products to be produced in 300 sets of Haitian MA series injection molding machine, which are custom made by Haitian group for YuFa to make the production more efficient, more stability and more econic. "In the future, YuFa will continually cooperating with Haitian Group to persue a LEAN production to provide the consumers with a better products", says Mr. Cai.
As the cash cow of Haitian Group, Haitian MA series high precision injection molding machine is one of the most popular servo injection molding machine ine the production of Pipe Fittings, Home living products etc.The newly joined MA/F series high speed hydraulic injection molding machine will help MA series make a big step forward in the market of IML Containers production.
U300TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 767 g |
| 3 | Shot Speed | 189 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 590 mm |
| 6 | Space Between Tie Bars | 610 x 585 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 640 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
