sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Haida Finished the Injection Cycle of 26s in An IML Production of A 33L Paint Bucket with Its HD700U & SWITEK IML Robot SW850
Tags: Haida Injection Molding Machine, HD700U, Injection Molding Machine for IML Bucket, SWITEK IML Robot
Haida achieved the total cycle of 26s in the IML production of 33L bucket with its new HD700U servo injection moldidng machine which is custom made for the IML production of large size buckets and the IML robot SW850 by SWITEK.
With a much larger opening stroke, HD700U is an ideal energy saving servo injection molding machine for the production large size containers which custom made for the booming IML buckets for paints. To better match the new injection molding machine, SWITEK upgraded the side entry IML robot SW850 to provide clients with a perfect Turn-key IML Solutons for paints buckets.
MARS 2500/1000G -- HaiTian Mars.G Series Servo Injection Moulding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 547 g |
| 3 | Shot Speed | 210 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 540 mm |
| 6 | Space Between Tie Bars | 570 x 570 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 570 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 17.75 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
