sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Eurasia Onshow 2 Cavities Buckets IML Solutions in Eurasia Plast 2019
Tags: Eurasia Robotic IML Solutions, IML Robot, SWITEK IML Solutions, Eurasia Plast, Cheaper IML Robot
Eurasia Robotic onshow 2 cavities 1000ml buckets side entry IML solutions with vision control control in Plast Eurasia 2019 by Tederic all electric injection molding machine DE290
1 Litter IML bucket is now getting more and more popular as a food container, and all electric injection molding machine is an idael choice for the food container production in a clean room. The combination of Eurasia robotic IML robot + Tederic all electric injection molding machine + vision control system is an ideal solution for the production of defect and biotic free food containers for the morden food industries.
A more economic option of the same solution would be SWITEK IML Robot, with the advantage of much lower labour cost and higher production efficiency, SWITEK IML Robot and vision control will have a 35+% advantage against the Eurasia Robotic IML Solutions. And proofed by the huge market in China, SWITEK IML System in production of 2 cavities 1 litter buckets would be just as efficient as the IML system by Eurasia Robotic. It's not easy to make money nowadays, why not to have a try?
HXF320 -- Haixing High Precision Energy Saving Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3200 kN |
| 2 | Shot Weight | 776 g |
| 3 | Shot Speed | 97 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 640 mm |
| 6 | Space Between Tie Bars | 685 x 685 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 690 mm |
| 9 | Pumper Motor | 45 kW |
| 10 | Heating Capacity | 24.2 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
