sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
ENGEL On Show 4+4 Stack Mould Box Side Entry IML Solutions
Tags: ENGEL E-SPEED 420, ENGEL Hybrid Injection Molding Machine, Stack Mould IML Solutions, SWITEK IML Solutions, IML Solutions for Box
ENGEL on show 4+4 stack mould extreme thin-wall containers 5 faces full wrap side entry IML Solutions with its up to date new hybrid injection molding machine e-speed 420.
The stack mould solution is an efficient solutions which will maximize the productivity of the injection molding machine in production of boxes in hudge quantity. As a basic box for cheese containing, the full wraped five faces labeling extreme thin-wall box is in demand of hudge quantity in the market and we can see nearly all the IML Solutions providers from European countries will provide a stack mould solution for this kind of box.
In China cheese is not what's would be on the table of every family, the same designed box is usually for the containing of icecream and in much less quantity but more varieties in design. In this case the IML container producers in China turned to adopt a sol of single mold say 4 cavities 3/5 faces labeling side entry IML Solutions. Although it's less efficient, but can be produced in a much small injection molding machine and much smaller investment to start the business up and reduce the risk of that customer will change the design of the containers. In this case, it would be a cost friendly solution to the new and small sized IML package producers.
JM258-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2580 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 216 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 580 x 580 mm |
| 7 | Mold Thickness (Min) | 190 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
