sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
ENGEL On Show 4 Cavities 125ml PET/rPET Cups IML Solutions at K2022 With e-speed 280
Tags: ENGEL e-speed Hybrid Injection Molding Machine, BRINK IML System, IML Robot, SWITEK IML Solutions, the Fastest IML System
ENGEL On Show PET/rPET Thin-wall Injection Solutions with Brink IML system at the cycle time of 2.8s by its new hybrid injection molding machine e-speed 280 at K2022.
With tailored plasticing equipment and extremely dynamic injection, the new hybrid injection molding machine e-speed is easy processing of PET even with thin-walled geometries. Together with Alpla Group, Brink Automation and IPB Printing, ENGEL is presenting visitors of K2022 a perfect PET/rPET high speed injection solution at the speed of 2.8s to produce a thin-walled containers directly in injection moulding from PET and rPET for the first time.
For 125ml cups, most of the producers will choose PP as the material and it had been available in the market for years. In K2019 SWITEK Automation cooperating with YIZUMI onshow their new 4 cavities 125ml cups high speed IML solutions at the speed of 2.1s with SWITEK new IML Robot SW833-19. This solution providing the cutting edge competitiveness in the overall cost performance against this product. It helps the small and medium size IML package producers to recall their invstment in a much shorter period and gain much more profit.
SW-M250-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 234 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 500 mm |
| 6 | Space Between Tie Bars | 575 x 525 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 28 kW |
| 10 | Heating Capacity | 15.3 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
