sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Sumitomo (SHI) Demag Demonstrated Their New Hybrid Injection Molding Machine EL-Exis SP 250-920 with a Fast Cycle IML Production
Tags: Sumitomo (SHI) Demag, Hybrid Injection Molding Machine, IML Solution, High Speed Injection Molding Machine, SWITEK IML Solutions
Sumitomo (SHI) Demag demonstrated their new hybrid injection molding machine EL-Exis SP 250-920 with a fast cycle 4 cavities butter box IML packaging production.
As one of the fastest hybrid injection molding machine available in the world designed for the thin-wall containers, it's one of the best injection molding machine for IML Solutions with SWITEK IML Robot SW833-19 and the high speed injection molding machine SW7112DS for the pick and place of the other thin-wall containers.
Servo Hydraulic Injection Molding Machine 260 SEIII B -- Welltec Machinery Ltd.
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2600 kN |
| 2 | Shot Weight | 772 g |
| 3 | Shot Speed | 175 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 600 mm |
| 6 | Space Between Tie Bars | 580 x 580 mm |
| 7 | Mold Thickness (Min) | 195 mm |
| 8 | Mold Thickness (Max) | 610 mm |
| 9 | Pumper Motor | 172 kW |
| 10 | Heating Capacity | 18.9 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
