sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
Sumitomo (SHI) Demag Demonstrate Their 4th Generation Hybrid Injection Molding Machien EL-EXIS SP420 On a 4+4 Cavities Stack Mould 500gram Butter Box IML Solution
Tags: Sumitomo (SHI) Demag, Hybrid Injection Molding Machine, EL-EXIS SP420, High Speed Injection Molding Machine, Injection Molding Machine for Thin-wall Container
Sumitomo (SHI) Demag showcased their new Hybrid high speed injection molding machine EL-Exis SP 420 on a 4+4 stack mould 500gram butter containers IML production which the mould supplied y Bazigos.
With smart driven system, the 4th generation EI-Exis SP is one of the fastest injection molding machine available in the market with no compromize of energy saving. It's one of the best injection molding machine for the packaging market such as IML Solutions, closure injectioin production, disposable cutlery, medical parts etc. To provide the customer with an efficient thin-wall container injection solution.
HXF230 -- Haixing High Precision Energy Saving Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2300 kN |
| 2 | Shot Weight | 447 g |
| 3 | Shot Speed | 116 mm/s |
| 4 | Screw Diameter | 50 mm |
| 5 | Opening Stroke | 490 mm |
| 6 | Space Between Tie Bars | 536 x 536 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 560 mm |
| 9 | Pumper Motor | 24 kW |
| 10 | Heating Capacity | 17.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
