sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Sumitomo Onshow New All Electric Injection Molding Machine IntElect S220 With 4 Cavities Lids IML Solutions
Tags: Demag Injection Molding Machine, All Electric Injection Molding Machine, IntElect S200, SWITEK IML Robot, Competella IML Roobt
Sumitomo (SHI) Demag Exhibiting their all electric injection molding machine IntElect S220 with 4 cavities lids IML solutions to show the performance of their all electric injection molding machine IntElect S220 - 100 in material efficiency and ensure full recyclabiliy du to the lids' monomaterial design.
The new all electric injection molding machine of Demag IntElect S 220 is designed for minimal environmental impact, the solution will maximize the material efficiency and ensure full recyclability by combining injection compression moulding and in-mould labeling (IML) in the production process. With the IML solution by the world leading IML Solution provider Competella Automation, it's no doubt one of the top IML lids production solution available in the market.
Anyway, an IML solution with Demag all electric injection molding machine and the Comptella IML Robot, it would be truely a challenge in the production cost to the package producers. A more price smart IML solution for lids would be the SW8 Series IML robot by SWITEK Automation with high speed injection molding machine made in China. The cost of such a system would be only around 1/3 of their European combination with similar productivity. It'll be much more competitive for samll and medium size package producers.
MARS 2500/1000G -- HaiTian Mars.G Series Servo Injection Moulding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 547 g |
| 3 | Shot Speed | 210 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 540 mm |
| 6 | Space Between Tie Bars | 570 x 570 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 570 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 17.75 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
