sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
An Economic Solution of IML Pails with Handle
Tags: IML Solutions, SWITEK IML Robot, YIZUIM Injection Molding Machine, IML Solutions for Pails with Handle Assembly, Chinaplas 2024
Is there any economic way for the small and medium size package producer to produce an IML pails economically and efficiently? The reply is yes. The design of having the pail and the handle in the same mould make the auto-assembly of the pails handles immediately after the IML production of the pails possible.
By cooperating with the top thin-wall container mould maker in China, SWITEK had been successfully delivered more than 10 sets of IML solutions with handle assembly systems to Russia and Australia for the production of IML pails from 500ml ~ 2.5L. With the successful installation and start up of these new IML systems, SWITEK IML team not only acquired the experience of IML system design and application but also the experience of working with the mould maker to provide the customer with a turn-key IML Solution.
With the soaring labour cost in the production sector, any products produced automatically is no doubt means not only competitive in prodution cost but also a stable supply, wich is even more important to the consuming industries as the IML pails with handles are mainly for the dairy products. The two cavities pails IML production would be an ideal solution for samll and medium sized package producers to start the business. If you're interested in this system, you can visit the booth of YIZUMI at Chinaplas 2024 to witness the productivity of the system.
BL300EKH/C1600 -- BOLE High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 1115 g |
| 3 | Shot Speed | 112 mm/s |
| 4 | Screw Diameter | 70 mm |
| 5 | Opening Stroke | 590 mm |
| 6 | Space Between Tie Bars | 655 x 605 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 660 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 19.55 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
