sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
Chinapals 2025 is Opening on April 14, 2025 at Shenzhen World Exhibition & Convention Center
Tags: Chinaplas 2025, Exhibition of Injection Molding Machinery, K-show, NPE, Haitian Injection Molding Machine
Chinaplas 2025 is opening on April 15, 2025 at ShenZhen World Exibition & Convention Center (Bao'an), ShenZhen, P.R.China, but the new policy made by the association of China Injection Machinery make the world 2nd largest exhibition of injection molding machinery a different one.
Different from its counter part K-show in Germany and the NPE in the USA which to be opened every three years, Chinaplas is the only large fair around the world of plastic industry to be held every year in Shenzhen and ShangHai respectly. The freqency of Chinaplas had been a big burden to the exhibitors not only financially but also in innovation. When the exhibition become a routine, the Chinaplas turns to be less attractive to both the exhibitors and the and visitors of Chinaplas.
Since years ago that the association of China Injection Machinery was negociating with Chinaplas to change the yearly event to be an event of every two years but not agreed, so the Association of Chinaplas Injection Machienry organized a boycott of Chinaplas 2025 which ordered that the memebers of the association not to attend Chinaplas 2025 which is opening on April 14, in Shenzhen.
What would be the Chinaplas 2025 looks like without the participating of the big names of injection molding machines like HaiTian and Yizumi? Will the Chinaplas organizer compromise to the boycott of the exhibitors to make it a two years event of to hold on to make its Shenzhen exhibition a platform for small and medium size manufacturer of injection molding machines? Maybe you'll find a different answer.
JM258-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2580 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 216 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 580 x 580 mm |
| 7 | Mold Thickness (Min) | 190 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
