sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
BORCHE is On Showing New All Electric Injection Molding Machine at Chinaplas 2024 Booth#5.1D22
Tags: BORCHE Machinery, All Electric Injection Molding Machine, Chinaplas 2024, BORCHE BD380-P, Injection Molding Machine for IML
BORCHE is welcomeing visiotors of Chinaplas 2024 to visit their booth # 5.1D22 to witness the performance of their new all electric injection molding machines.
As the key products of BORCHE machinery, the two-platen injection molding machine would be still the high lights of the Show. In Chinaplas 2024 BORCHE will show case their all electric two platens injection molding machine BU800-EV which focus on the production of high transparency lights for automotives; The direct drive high speed all electric injection molding machine BD380-P focus on the IML Yogurt cups productions.
Besides the showcase of their cutting edge new all electric injection molding machines, BORCHE will also showcase their new generation of MES system for the management of plastic parts production. With the new MES system, the plants of the plastic parts whill have a better control of the products quality and ensure a just in time delivery of the orders.
SW-M220-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2200 kN |
| 2 | Shot Weight | 541 g |
| 3 | Shot Speed | 200 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 500 mm |
| 6 | Space Between Tie Bars | 575 x 525 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 23 kW |
| 10 | Heating Capacity | 14.4 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
