sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Visiting Chinapls 2025, Have a Factory Tour of SWITEK Automation
Tags: Chinaplas 2025, SWITEK Automation, IML Solutions, IML Robot, SWITEK IML
The world's leading plastic and rubber trade fair Chinaplas 2025 is opening soon on April 15, 2025 in Shenzhen world exhibition & convention center (Bao'an'). We're here sincerely invite you to have a factory tour of SWITEK Automation during your visiting of Chinaplas 2025 to have a better understanding of SWITEK IML and other injection automation solutions.
What would be the benefit of having a factory tour of SWITEK Automation?
Any hesitation? If you have any project of IML and other injection automation solutions on going, do hesitate to contact Adams for a factory visiting of SWITEK Automation, we'll arrange a picking of you from either the Chinaplas fair or your hotel for a in private discussion. It'll take only about one and a half hours from the exhibition center to SWITEK.
JM258-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2580 kN |
| 2 | Shot Weight | 502 g |
| 3 | Shot Speed | 216 mm/s |
| 4 | Screw Diameter | 52 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 580 x 580 mm |
| 7 | Mold Thickness (Min) | 190 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
