sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
HWAMDA (HMD) Showcased High Speed All Electric Injection Molding Machine with IML Solutions at Chinapls 2023
Tags: HWAMDA Injection Molding Machine, Chinaplas, SWITEK IML Robot, All Electric Injection Molding Machine, HQ Mould
Turn-key 4 Cavities Lids Side Entry IML Solutions
Starting from $75,714
HWAMDA (HMD) Showcased their new EM series high speed all electric injection molding machine in demo IML production of 4 cavities Yogurt cups lid at the cycle time of 2.3s by SWITEK IML robot and HQ Mould at Chinaplas 2023.
As the leading high speed injection molding machine manufacturer in China, HWAMDA (HMD) high speed hydraulic injection molding machines are warmly welcomed by the producers of thin-wall containers especially the producers of IML containers. EM series high speed all electric injection molding machine are their new generation of injection molding for the trend of a "CLEANER" production request of the food packages. With a total cycle time of 2.3s only, it's one of the fastest IML system in Chinaplas 2023 and attracted the attention of the IML insiders.
By cooperating with SWITEK Automation and HQ mould, the HMD IML solutions for the production of IML lids is an efficient but eco-friendly solutions for the food package producers. With more than 10 years' experience in the high speed production of IML thin-wall containers, the combination of HMD high speed all electric injection molding machine + SWITEK IML Robot + HQ thin-wall mold is no doubt one of the price smart IML Solutions.
SW-M220-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2200 kN |
| 2 | Shot Weight | 541 g |
| 3 | Shot Speed | 200 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 500 mm |
| 6 | Space Between Tie Bars | 575 x 525 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 23 kW |
| 10 | Heating Capacity | 14.4 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
