sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
SWITEK New 4 Cavities Burger King Twin-Cups Side Entry IML System Started Up
Tags: SWITEK IML Robot, IML Solutions, Burger King Twin Cups Production Facility,
SWITEK new 4 cavities Burger King twin cup side entry IML robot well started for the IML production of the new twin cup for Burger King.
The new designed IML cup has two compartments which for a combo of two different snacks or chips with sauce, the unique designed bottom of the cup make it convenient to be stucked to somewhere while enjoy the delicious food. The Yelow/Red design label make it attractive to the consumers. But because of the joint line of the label is just at the center of the stucking center, it request that the IML system to provide a precise labeling in the cups production.
To ensure the labeling quality of the cups, SWITEK R&D team well studied the struct of the cup and the mold design and well optimized the design of the magazine to ensure the labeling precision. With the cooperating of R&D, the production and the after service team, the IML system started up successfuly for the bulk production of the twin-cups in Russia.
MARS 2500/1000G -- HaiTian Mars.G Series Servo Injection Moulding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2500 kN |
| 2 | Shot Weight | 651 g |
| 3 | Shot Speed | 250 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 540 mm |
| 6 | Space Between Tie Bars | 570 x 570 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 570 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 17.75 kW |
PVC/PPR ball valve is a very important pipe fittings in the drainage system in control of the water flow. But the injection production of a ball valve it'll need to insert the core of the valve with the sealing ring into the mold. The in mold insertion of the spare parts would be done manually which the cost is increasing with the getting higher labour cost and difficult to increase the productivity. That's why LESSO group invited SWITEK Automation to develop a series of pipe fittings auto-production solutions, among which include the Ball Valve Core Insertion System.
Designated to design an economic but efficient automation solution of ball valve injection production, the SWITEK 4 cavities ball valve in mold insertion solutions include the following functions:
For detailed cofiguration of SWITEK ball valve injection automation system please contact Adams of SWITEK to get a turn-key automation solutions of PVC/PPR ball valve production.
