sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
BORCHE On Show 660 US Ton Injection Molding Machine at NPE 2024
Tags: BORCHE Two Platen Injection Molding Machine, NPE 2024, Robot for Two Platen Injection Molding Machine, Injection Automation, Bottle Crate Production Machine
In the just finished NPE 2024, BORCHE, the renowned intelligent two platen injection molding machine manufacturer from China, on showed their two platen injection molding machine BU600-V in production of bottle crate.
As the largest show of injection molding machinery in North America, NPE is no doubt the most influencial injection molding machinery show in North America especially the booming Mexican market. It seems that BORCHE is also highly valued this exhibition. In the show BORCHE showed the application of their two platen injection molding machines which include the production of Bottle Crate, the Pet Food Bowl and the Helmet Buckle.
For all the production demo in NPE 2024, BORCHE have all their injection molding machine equipped with an injection robot which is a trend globally with the increasing the man hour cost and will help to increase the productity and safety in the production. In NPE 2024 we found that injection molding automation is no doubt will help the plastic parts producer to reduce the production cost and keep them competitive in the market, and a good service will help the injection robot manufacturer to win-out is this campaign.
U265TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2650 kN |
| 2 | Shot Weight | 833 g |
| 3 | Shot Speed | 190 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 585 x 565 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
