sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
BOLE New EKH Series Injection Molding Machine Installed in Thailand for Car-parts Production
Tags: BOLE Injection Molding Machine, BOLE EKH Series Injection Molding Machine, Central Clamping Technology, SWITEK Injection Robot
BOLE Machinery new injection molding machine BL530EKH/C4000 installated in Thailand in production of motorcycle accessories produced of ABS material.
As one of the top 10 injection molding machine manufacturer from China, the EKH series Hydraulic servo energy saving injection molding machine produced by BOLE proved a 100% clamping force efficiency with BOLE central clamping toggle design compared to traditional edge clamping force of only 80~85%. The EKH series of injection molding machine is the key products of BOLE machinery for the car-parts injection industry.
To increase the production efficiency and the production safety, the injection robot recommended for BOLE EKH series of injection molding machine would be SWITEK SW6 series injection robot. With a payload from 3~15kg, SWITEK SW6 series injection robot is a perfect match of BOLE EKH series of injection molding machine in production of car-parts in parts picking, runner cutting, in mold insertion etc.
JM208-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2080 kN |
| 2 | Shot Weight | 669 g |
| 3 | Shot Speed | 287 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 510 mm |
| 6 | Space Between Tie Bars | 530 x 530 mm |
| 7 | Mold Thickness (Min) | 180 mm |
| 8 | Mold Thickness (Max) | 550 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 16.6 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
