sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Chinaplas 2023 | SumitomoSHIDEMAG will Show up their Two Tone Injection Molding Machine
Abstract:Sumitomo will on show their two tone injection molding machine at Chinaplas 2023 at booth 11G41
Tags: sumitomo injection molding machine, Chinaplas 2023, two tone injection molding machine, SE180EV-A C560, SE400HS-CI injection molding machine
SumitomoSHIDEMAG, will onshow their two tone injection molding machine SE400HS-CI at booth # 11G41 with a production demo of automtive inner decorating parts.
Also they'll on show their SE180EV-A with a demo production of wireless cover by the technology of IMR (In-Mould Decoration by Roller), whichi is a 1 cavities injection solution with the part weight 10g and total cycle of 25s to show the precision injection performance of Sumitomo SE180EV-A in the production of ABS parts.
U238TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2380 kN |
| 2 | Shot Weight | 754 g |
| 3 | Shot Speed | 160 mm/s |
| 4 | Screw Diameter | 65 mm |
| 5 | Opening Stroke | 520 mm |
| 6 | Space Between Tie Bars | 530 x 530 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
