sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
ARGE Side Entry IML System for 1200cc Buckets In Production with BMBKW28 Injection Molding Machine
Tags: ARGE IML Robot, BMB Injection Molding Machine, SWITEK IML Robot, IML Robot for Buckets
Arge side entry IML robot for 2 cavities 1200cc buckets by BMB KW28 injection molding machine in production.
The Side Entry IML Robot designed by Arge Robotik is an efficient IML system with the parts picking and labeling of the buckets done synchronous to achieve the highest productivity of the system. With perfect decorting and high safety, IML buckets around 1000cc is now very popular as the containers of food such as chocolate etc.
As a bucket with handle, the Arge system will have the handle of the buckets assembled manually while the new solution by SWITEK Automation will have the handle assembled automatically. As a turn-key automation system, SWITEK automation will provide the injection molding with the IML system to be well tested before delivery and ensure that the system you get is a ready to wrok one to reduce your system start up cost.
Servo Hydraulic Injection Molding Machine 260 SEIII B -- Welltec Machinery Ltd.
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2600 kN |
| 2 | Shot Weight | 772 g |
| 3 | Shot Speed | 175 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 600 mm |
| 6 | Space Between Tie Bars | 580 x 580 mm |
| 7 | Mold Thickness (Min) | 195 mm |
| 8 | Mold Thickness (Max) | 610 mm |
| 9 | Pumper Motor | 172 kW |
| 10 | Heating Capacity | 18.9 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
