sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Arge Double Arms Top Entry IML Systems for Buckets
Abstract:Arge Automation double arms top entry IML solutions for 1 cavity bucket synchronous IML production
Tags: Arge IML Solutions, Top Entry IML Systems, IML Solutions for Buckets, SWITEK IML Solutions, Counter Parts of ARGE IML Solution
Arge Automation double arms top entry IML solutions for 1 cavity bucket synchronous IML production
For double arms top entry IML solutions it's mostly a solution for the production of IML Lids to have a synchronous parts picking and labeling for a higher production efficiency but not increase the size of the injection molding machine too much. To have a double arms top entry IML solution for the production of IML bucket is a brave adenture in system design because an injection molding machine with sufficient opening stroke will increase the cost of the system dramatically.
A better solution for efficient IML production of IML production would be a Side Entry IML Robot which will have a much better consistence of the parts and much shorter in mold time for a higher productivity. Any, ARGE have a double arms top entry IML robot for the production of IML buckets is a new try and provide more opportunities to the small and medium size IML buckets producers.
SW-M280-- SWITEK High Precision Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2800 kN |
| 2 | Shot Weight | 649 g |
| 3 | Shot Speed | 307 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 560 mm |
| 6 | Space Between Tie Bars | 625 x 575 mm |
| 7 | Mold Thickness (Min) | 220 mm |
| 8 | Mold Thickness (Max) | 600 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 17.2 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
