sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
Arge Robotik 3 Axis Top Entry IML Robot Installed for the Production of 12L Rectangular IML Buckets.
Tags: Arge Robotik, Top Entry IML System, IML Robot, SWITEK Robot, IML Solution for Rectangular Buckets.
Arge Robotik 3 axis top entry IML robot installed for the production of 12L rectangular IML Buckets.
The IML robot installed is a solution for the production of 12L rectangular IML buckets. Unlike the round bucket, the rectangular buckets has four angels and is not easy to have it well labeled, to solve this problem, 3 brushes were added for a better wrapping of the lables. With different type of label material, different static scheme would be applied.
As the competitor of Arge robotik, SWITEK Automation had been providing the turn-key IML Solutions since 2009. For an IML solution for injection molding machine around 450T, the IML robot can be SWITEK SW7312DS, which has a payload up to 8kg, is a perfect robot for small and medium size containers top entry IML System.
MARS 3000/1800G -- HaiTian Mars.G Series Servo Injection Moulding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 1047 g |
| 3 | Shot Speed | 324 mm/s |
| 4 | Screw Diameter | 70 mm |
| 5 | Opening Stroke | 600 mm |
| 6 | Space Between Tie Bars | 660 x 660 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 660 mm |
| 9 | Pumper Motor | 30 kW |
| 10 | Heating Capacity | 24.05 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
