sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
sales06@switek.biz
+86 186 5927 5869
Shopping
Subscrib to Us
Chinapals 2023 | HMD Working with SWITEK for Higher Speed IML Solutions for Lids
Tags: Chinaplas 2023, side entry iml solutions, HMD injection molding machine, all electric injection molding machine, injection automation solutions
The high speed injection molding machine manufacturer HMD Machinery is working with the top IML solution provider in China SWITEK Technology to launch a high speed side entry side entry iml solutions for lids at Chinaplas 2023 booth #12L31 to help the food package producers to increase the productivity further.
The new system is a combination of the 4th generation of IML Technology which is aiming at the fast changing market in the food and beverage package market to enable the producers upgrade their products deisgn with a minimal possible cost and the new high speed all electric injection molding machine with a total cycle time of 2.5s only.
With the re-opening to the outside world after 3 years' fighting against the COVID-19, Chinaplas 2023 will bring more new high performance injection machinery and solutions to the global plastic industry.
The system has now well finished the in hous testing and would be onshow from April 17th~20th at the Shenzhen Exhibition Center.
Servo Hydraulic Injection Molding Machine 320 SEIII A -- Welltec Machinery Ltd.
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3200 kN |
| 2 | Shot Weight | 836 g |
| 3 | Shot Speed | 224 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 700 mm |
| 6 | Space Between Tie Bars | 680 x 680 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 700 mm |
| 9 | Pumper Motor | 220 kW |
| 10 | Heating Capacity | 22.15 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
