sales06@switek.biz
+86 186 5927 5869
Subscript to Us
sales06@switek.biz
+86 186 5927 5869
Subscript to Us
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
Tags: SWITEK IML Solutions, IML Robot for Metallic Label, Side Entry IML Robot for Cups, How is IML Beverage Cups Produced, The Cost of an IML System
SWITEK new 6 cavities 250ml cups with metallic label is ready for the bulk production of the shinning cups for the branded beverage stores in Thailand.
Different from the other IML system which will have the label static charged by the mandril with static pins built inside, the new 6 cavities cups side entry IML system has an extra static charging ring installed to the robot just outside the mold. It's because of the label for the cups are metallic labels, which is positive to the static and must be static charged from the outside of the label to ensure the metallic labels are well charged.
With shinning looking, a beverage cup with metallic label will help to high light the image of the brand and differ the products from the other competitors. For sure it will help to attract the attention of the consumers especially the kids and young girls.
For more solutions of IML please feel free to contact Adams from SWITEK, for a price smart turn-key IML Solutions.
U238TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 2380 kN |
| 2 | Shot Weight | 540 g |
| 3 | Shot Speed | 160 mm/s |
| 4 | Screw Diameter | 55 mm |
| 5 | Opening Stroke | 520 mm |
| 6 | Space Between Tie Bars | 530 x 530 mm |
| 7 | Mold Thickness (Min) | 200 mm |
| 8 | Mold Thickness (Max) | 580 mm |
| 9 | Pumper Motor | 22 kW |
| 10 | Heating Capacity | 24.7 kW |
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
