SWITEK Engineer Finished the Installation of New Magazines in Chile
Tags: SWITEK IML, IML Robot, IML Solutions, Side Entry IML Robot, Chinese IML Robot Manufacturer
SWITEK engineer finished the installation of a 4 cavities magazine of box 5 faces labeling installed to an old IML robot and started up in Chile.
The new installation service of our engineer in Chile is for the upgrading of the IML system which our clients have for a new market with the minimum investment by only replace the magazine and EOAT to switch the IML system from the production of one container to the other. With onsite installation and maintenance service from SWITEK, our clients will get a renewed IML system of efficient and stable.
As one of leading IML solutions provider growing up from the fast changing Chinese market, SWITEK engineers will always have "upgradable" ideal as the guideline of an IML system because our clients are challenging in a fast changing market, which means that they're allowed to upgrade their system immediately to provide their customer a new package. Designed under this mechanism, the SW8 series of IML robot if one of the best choice for small and medium sized producers of IML containers.
BL300EKH/C1600 -- BOLE High Precision Hydraulic Servo Injection Molding Machine
| No. | Name | Value |
|---|---|---|
| 1 | Clamping Force | 3000 kN |
| 2 | Shot Weight | 819 g |
| 3 | Shot Speed | 112 mm/s |
| 4 | Screw Diameter | 60 mm |
| 5 | Opening Stroke | 590 mm |
| 6 | Space Between Tie Bars | 655 x 605 mm |
| 7 | Mold Thickness (Min) | 250 mm |
| 8 | Mold Thickness (Max) | 660 mm |
| 9 | Pumper Motor | 37 kW |
| 10 | Heating Capacity | 19.55 kW |
For PVC/PPR pipe fittings with nuts with a diameter of around φ25mm most of the producer will choose an injection molding machine of around 250T and a mold cavities of 8 Cavities, will a more cavities mold design with a larger injection molding machine a better choice for pipe fittings producers?
According to the experience of working with LESSO group in the automiztion of their PVC/PPR pipe fittings injection production system, we finally decide to have an 8 cavities mold deisgn with 250T injection molding machine because:
Anyway, to upgrade your PVC/PPR pipe fittings injection molding system you must keep in mind that it's only valuable to have an automation system for bulk production products, which means that one injection molding machine with only one mold to be equipped with one automation system for the pipe fittings' Nut insertion, runner cutting and parts picking.
For any other question about a PVC/PPR pipe fittings auto-production system please contact Adams from SWITEK for a turn-key solutions of pipe fittings production.